SpeedFan 4.35 Released

For those of you looking to monitor temps and control fan speeds, a new version of SpeedFan just hit the street:

[quote]4.35  –  released to the public the EXOTICS tab
– fixed 120 DPI issue in CONFIGURE dialog
– added full support for Areca RAID controllers
– greatly improved SCSI support
– added support for Abit uGuru 3 (uGuru 2005)
– added full support for Intel FB-DIMM temperature readings
– added full support for ITE IT8720F
– added full support for Andigilog aSC7611
– added full support for LM96000 (it was previously detected as LM85B)
– added full support for Analog Devices ADT7490
– added full support for SMSC SCH5327
– fixed Windbond W83766HG hardware monitor detection on some Asus motherboards
– improved CPU identification routines
– added support for a new revision of the WINBOND W83637HF
– added support for WINBOND W83637HF at unusual addresses
– added support for Asus F8000 at unusual addresses
– added identification of the SMSC SCH5514
– added identification of SMSC EMC2300
– added ITE IT8718F fifth fan speed reporting
– added identification of Analog Devices ADP3228
– added identification of ITE IT8512F
– added identification of Winbond W83667HG SuperIO chip
– identified a new revision of Fintek F71872 hardware monitor subsystem
– added preliminary detection of the HECI driver
– fixed a bug in SMSC LPC47M172 support code that prevented fan speeds to be properly reported
– 45nm Intel CPUs with CPUID=0x10676 now use a Tjmax value of either 105C or 90C
– added full support for nVidia MCP65 SMBus
– added full support for nVidia MCP67 SMBus
– added full support for nVidia MCP73 SMBus
– added full support for nVidia MCP78S SMBus
– added full support for VIA CX700M SMBus
– added full support for Intel 82801JIB SMBus
– fixed an issue where the Intel SMBus couldn’t be accessed and messages like SMBus msg : SMB Error $14 : FAILED (50) were generated
– enabled Intel ICH8M-E SMBus device, if needed
– enabled 631xESB SMBus, if needed
– enabled SMBus on Intel ICH9R, if needed
– preliminary detection of AMD CD5536 SMBus
– some SMBus addresses on Asus Striker Extreme are no longer scanned
– SMBus is no longer scanned at address $2E on DELL XPS710
– Tyan S2927 second SMBus is no longer scanned
– some addresses on the SMBus of Asus P5NT WS are no longer scanned
– some addresses on the SMBus of the Intel DX38BT are no longer scanned
– some SMBus addresses are no longer scanned on Asus M2N32-SLI DELUXE
– the second nForce SMBus is no longer scanned on FIC AU31
– some addresses on the SMBus of Supermicro H8DCE are no longer scanned
– added some SMBus scan exclusions for Intel D5400XS
– added /NOGIVEIO command line parameter to disable access to giveio.sys
– added /NOGEFORCEROM command line switch that will prevent SpeedFan from reading nVidia GeForce ROMs (useful if it takes too much time)
– nVidia video BIOS is now stored in a file for later retrieval
– fixed an access violation under Win9x with some nVidia video cards
– battery status messages are no longer displayed
– upon resume, all controlled fans are set to 100% for half a second, then set to their minimum fan speed
– added new configuration option SHOWSTATICICON
– enabled Intel 6300ESB SMBus if needed[/quote]

http://www.almico.com/speedfan.php