I used the item Andrew linked

[Aaron Ledger]

I used the item Andrew linked to. There are two holes on the front of the chassis for LEDs. I decided against using the top power LED in favor of the CIR IR receiver. In order to make it work, I unsoldered the IR receiver from the board itself (3 pins). I then took some wires and connectors and soldered them to the board and IR receiver such that the two could be unlinked as needed. The IR receiver lens portion was superglued to the chassis which has held well. The board was placed inside the chassis and held down with some velcro.

It’s not too difficult if you’ve got the items on-hand and have done some soldering before.