How to be irritated and then just veg out

[Jeremy Duncan]

x, y axis: x meets y at a certain point
z axis: Reaching the z axis point is the goal that brings the x and y axis together.
4th dimension, Time: The method employed in handling the x and y axis so the z axis can be reached.

If the x, y axis join and there is a problem

The x axis is a screw holding a heatsink down, the y axis is the screwdriver in the screw turning the screw.
The x axis has a soft screw and the heatsink raised the temperature of both the screw and the screw hole.
The heat expanded the metal screw hole making it tighter, and made the screw softer as it is hotter.

The goal is the z axis, to get the screw off, apply thermal paste and have a cooler cpu.
But to get there the x, y axis must be successfully handled.
Now since heat is causing the problem with the screw and screw hole, they must be cooled before turning the screw or else the screw will snap off in the screw hole.
And to cool the x axis the 4th dimension time is used.
By powering down the pc and waiting for it to cool down the screw is taken out and nothing breaks.

So the 4th dimension is employed and by working makes the z axis a reality.
But if the 4th dimension does not have the x, y axis the method of time cannot bring a uncorrupt z axis.
Meaning if the y axis turns the screw when it’s hot then the screw bends in the screw hole but doesn’t snap off, then applying the 4th dimension may or may not be successful.
And the quality of x, y relative to the 4th dimension affects the result the 4th dimension can produce when creating the z axis.

Because the 4th dimension is employed, the amount of time used to create the z axis may vary from employee to employee.
One employee may use the best technical measure when using the 4th dimension and so the z axis is quality.
Another employee may use a don’t care attitude and so the 4th dimension uses a inferior specification and the z axis is a cheap quality product.
And if two empoyees look at a job they may have the best intention to create a excellent product but the x, y axis is so wretchedly marred the 4th dimension cannot work worth a darn.

When developing products the entire development process is visable: x, z, y axis and the fourth dimension.
When a consumer see’s a product they see the 4th dimension, a product being used by them and their loved ones over a period of time and how long will it take to pay it off.
A person may become confused if they percieve themselves as a consumer and their peers see them as a peer developer, big brother comes to mind.
In the case of the consumer being interested in 4th dimension logic and problem solving skills and being faced with the development cycle that involves the x, y, z axis the irritation is in a word Interposition.
The consumer only wants to be concerned with one thing but other things present themselves and this unwanted presence is a Interposition.

If a consumer wants a product to work as they are on a schedule and it breaks on them and they must tinker around with it to work this problem is a Interposition and breaks the persons rhythm.
So if you are irritated at the world or a person then just relax in a environment that is away from development cycles involving you and just veg out.

[Author]

Posts