Poor BluRay playback with ArcSoft TMT5

Home › Forums › Home Theater Computers › Poor BluRay playback with ArcSoft TMT5

  • This topic has 2 replies, 2 voices, and was last updated 13 years ago by SJMaye.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 21, 2011 at 12:08 pm #26489
    SJMaye

      Based on the past review I purchased TMT5.  It has been installed a while, but I just got my first chance to try playing a BluRay.  Playback was really poor both within MC and outside.  Very frequent 1 second freezes.  Almost like a caching problem.  I do not remember having this problem with TMT3.  I saw no settings that had any effect on the problem.

      Any help would be appreciated.

      System is:

      CPU- i7-860

      Ram- DDR3 1300 4GB

      Video card – AMD HD5670

       

       

      December 21, 2011 at 8:57 pm #32031
      phoneguyinpgh

        Go into the settings, under video, make sure hardware acceleration is enabled/checked.  This needs to be done both inside and outside MC as they use different exe files.

        December 22, 2011 at 9:59 am #32035
        SJMaye

          Will give it a try.  Thx. 

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.