I ran 6 CAT6 lines and 6 RG6 lines and also 1 3/4in smurf tube to where my future wiring closet will be. Would you suggest anything else.
The office will have my media server in there and the video out will run thru the wall to my TV in the living room which is on the other side of the wall. Hopefully there aren’t any signal issues. There will be three separate cables used for a total length of about 12 feet. I’ll also be sending USB thru the wall for the IR receiver.
I had to run so much RG6 so I could support the 6 TV tuners and 1 FM tuner. I figured each line being dedicated to 1 8 way splitter was better than several 2 way splitters at the end. Plus I can move the ends from either the cable source to the UHF antenna source easily in the box.
I just need to buy a labeler now. And one of those tone thingys so I can label existing runs.
.
