ferrytrip1

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: I have seen debate ov 32bit #4231
    ferrytrip1

      I have seen debate ov 32bit vs 64bit Win7.  Most that I have found indicates 32bit is just fine, but that comes from reviews from 2010.  Is the current thinking 32bit or 64bit?

       

      Thanks

      Simon

      in reply to: Thank you. I have the #4150
      ferrytrip1

        Thank you.

        I have the manual.  Its not quite right as there a 5 connectors in all – 2 separate USB to the right – no markings but assume red is power black is ground.  Center one has marking on, LHS, SD card has no markings, assume black is ground also.

        I have read the review, it was that that convinced me this was the right case.

        Thanks everybody for the input.

        Simon

         

        in reply to: I found the manual on the us #4147
        ferrytrip1

          I found the manual on the us website – the european one does not have it.  It is still not clear which connector goes to whaon the board.  If anybody has idents with cable colours it will help.

          Thanks, Simon

          in reply to: My 320B arrived today.  A #4141
          ferrytrip1

            My 320B arrived today.  A little disappointed.  The Manual in the box is for a 312B.  Seems there are different ports on the front of the 312.  The cables to the circuit boards are not marked so there is a risk of getting them mixed up and wrongly connected

            I will search for a 320 manual – if anybody has one or can point to a site I would appreciate it.  Otherwise if anybody could send the correct cable identifications for each of the internal cables it would also be appreciated.

            Where is the ir receiver in this case?  Which is the connector for the m/b.

            Thanks for the help

            Simon

            in reply to: Thanks for the advice and #4132
            ferrytrip1

              Thanks for the advice and good spot on my choice of cooler.

              Would it be worth the stretch to an i3 or would I see no difference?

              Thanks

              Simon

              in reply to: Thanks for this – I was not #4121
              ferrytrip1

                Thanks for this – I was not aware of this processor.  Just looked at m/boards – would either of these suit?

                Intel BOXDH67GDB3 or Gigabyte GA-H67MA-D2H-B3

                Would I get away with one stick of RAM?

                If I need to disable the UAC I will ask in the future.

                I have found a passive cooler –Akasa AK-395-, which I hope will be cool and quiet.

                Thanks

                Simon

              Viewing 6 posts - 1 through 6 (of 6 total)