PHT
Forum Replies Created
-
AuthorPosts
-
PHT
Only one 2.5″ HD, so up to 2TB (as today).
Of course mSATA can be as big as 1TB (as today)Regards
PHTNew fanless model from Wesena. I will get two for testing this week. Thin-mini-ITX only. 210 x 210 x 50 mm. (8.25 x 8.25 x 2″)
PHTYes, NUC model will be offered as well, but later this year.
Regards
PHTHi Guys We designed and built a prototype of ultra slim chassis. After testing, it is ready for production. Standard width – 435mm (17 1/8″), Depth only 310mm (12 3/16″) and ONLY 40mm high (48mm with feet)! How do you like it? Do you like it at all? Accommodates Thin Mini ITX mobo, one 2.5″ HDD, one slim ODD, two 3.5″ HDDs one half size card (Tuner, SOtM tX-USBexp or something else.) There is a space for SOtM as well. Production will start in July. More pictures and information is here.
PHTHi Guys
This is old ST-4-Black chassis (square feet) and a new one Round feet).
Which one do you like better?
Regards
PHTHi Guys
What do you think about chassis for Thin-Mini-ITX motherboard?
I look at GA-H87TN. I can install mSATA HD (up to 1 TB), WI-FI/ Bluetooh module, enough memory, Haswell CPU, flat HSF and have nice streaming device or music server or HTPC in small package without wires at all. PSU is build in motherboard as well, so I have to add AC/DC converter to supply 19 or 12V and I have nice piece of equipment.Waiting for your inputs
RegardsPHTOr this one:
PHTHi Guys,
How do you like this chassis? I am considering production of this model.
PHT[quote=Techbutton]
How big is it?
[/quote]250mm = ~10″ high.
Regards
PHT[quote=Mike Garcen]
it’s certainly unique…i don’t dislike it as much as Andrew. I actually like it better than the bookshelf one, if only because it’s so unique and could fit in a number of places. i’m assuming those are vents at the top?
[/quote]
Vents and radiator. This is fanless chassis.
Regards
PHT[quote=Mike Garcen]
it’s certainly unique…i don’t dislike it as much as Andrew. I actually like it better than the bookshelf one, if only because it’s so unique and could fit in a number of places. i’m assuming those are vents at the top?
[/quote]
Vents and radiator. This is fanless chassis.
Regards
PHTHi Guys
What do you think about this – crazy – concept? Does anybody like it?
PHTI moved bottom plate close to wall ~6mm (total distance 32mm) and still could put upper bracket with no problem. I think that I can assure you that 33mm from wall is safe. So if the edge of CPU mount is at least 14mm from Motherboard edge – you are OK. (It is 19mm from the Motherboard edge on H81M-ITX)
I hope that my info and pictures are helpful.
PHTHP4-97 arrived yesterday, so I grabbed FC5, installed ASRock H81M-ITX and checked how new pipes will fit. Look at pictures. CPU socket can be 4÷5 mm closer to wall and it still will be OK. I don’t have ASROCK Z87E-ITX, but looking at pictures it looks to me, that socket on ASROCK Z87E-ITX is closer to motherboard edge, but just a little, so it should be OK – I think. HP4-97 are compatible with FLS-3, FLS-4, FLS-7 and FLS-8.
Just look at pictures, please.
PHTI agree with you. I call this “bookshelf”, but some people may like it as HTPC as well.
Regards
-
AuthorPosts